Supplier Development Engineer (Mechanical Engineering)

requirements to the supply base Scope out new forming, cutting, and inspection technologies and suppliers that may be employed to improve rate/quality/efficiency Review issues on assigned parts and solve to the root cause, implementing changes at the supplier, at SpaceX or both, as appropriate, drive further actions to closure, and re-source to new suppliers where appropriate Create and disposition issue tickets where needed, working with engineering counterparts to implement, but not limited to, required re-work, repair or use as-is disposition Become thoroughly familiar with your assigned parts and the processes that make up the overall assembly and become the primary point of contact for supply chain related defects on your parts Demonstrate innovation, technical excellence, attention to detail, self-direction and courage to push the technical envelope which is conventionally held in the industry. Lead containment activities on assigned parts, working with cross-functional counterparts to agree on scope, path forward and ultimate resolution BASIC

QUALIFICATIONS: Bachelor’s degree in an engineering discipline 1+ years of experience with manufacturing and/or inspection of mechanical products in a production environment PREFERRED SKILLS AND EXPERIENCE: Master’s degree in engineering or business Fundamental understanding of propulsion/fluid systems and the respective component manufacturing processes including: raw materials, draw forming, extrusions, seamless and welded tubing, pipe manufacturing, bending, welding, proof/pressure testing, and other forming & assembly processes. Fundamental understanding of sheet metal forming, cutting, and assembly processes, particularly in stretch forming (longitudinal and transverse), stamping (progressing and transfer), spin forming, roll forming, roll bending, press brake forming, hydroforming and tube forming/bending of primarily, but not limited to, stainless and carbon steels. Experience with machining and ancillary operations such as milling, turning, and tube cutting of materials Experience with engineering drawings, modeling, GD&T, etc. General familiarity with welding (TIG, MIG and orbital tube welding) of stainless and carbon steels is a plus Knowledge of supplier quality processes (production part approval process, advanced product quality planning, first article inspection reports, etc.) Knowledge of statistical techniques and methods, e.g., design of experiments, Lean, Six Sigma, etc. Experience with quality systems (ISO 9000/TS/AS9100/NADCAP) and MRP/ERP systems Disciplined approach to problem solving - 8D Proficient in MS Office and Excel applications and report writing Experience with sharing information and influencing others across organizational lines, internally and externally Experience with PPAP and related elements (PFD, PFMEA, control plan, process capability, etc.) Experience leading containments of discrepant product Experience in manufacturing with different grades of stainless steel ADDITIONAL

REQUIREMENTS: Ability to work extended hours, some nights and/or weekends when needed Ability to travel: up to 40-50% work week travel ITAR

REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Learn more about the ITAR here . SpaceX is an Equal Opportunity Employer; employment with SpaceX is governed on the basis of merit, competence and

qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Applicants wishing to view a copy of SpaceX’s Affirmative Action Plan for veterans and individuals with disabilities, or applicants requiring reasonable accommodation to the application/interview process should reach out to [email protected] . Create a Job Alert Interested in building your career at SpaceX? Get future opportunities sent straight to your email. Create alert Apply for this job * indicates a required field Autofill with MyGreenhouse First Name * Last Name * Preferred First Name Email * Phone Country * Phone * Location (City) * Locate me Resume/CV * Attach Attach Enter manually Enter manually Accepted file types: pdf, doc, docx, txt, rtf Education School * Select... Degree * Select... Discipline Select... Add another LinkedIn Profile Portfolio or Cover Letter Attach Attach Accepted file types: pdf, doc, docx, txt, rtf How did you hear about this job? * Select... If event or other, please specify below. Please specify GPA (Undergraduate) * Select... Please convert your GPA to a 4.0 scale. Select "Not applicable/Do not recall" if you do not have or do not remember your undergraduate GPA. GPA (Graduate) * Select... Please convert your GPA to a 4.0 scale. Select "Not applicable/Do not recall" if you do not have or do not remember your graduate GPA. GPA (Doctorate) * Select... Please convert your GPA to a 4.0 scale. Select "Not applicable/Do not recall" if you do not have or do not remember your doctorate GPA. SAT Score * Select... ACT Score * Select... GRE Score * Select... Active Security Clearance(s) * Select... SpaceX Employment History * Select... Can you perform all of the essential functions of this role with or without reasonable accommodations? * Select... Are you legally authorized to work in the United States? * Select... Citizenship Status * Select... To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Learn more about ITAR here . If (f) Other, please explain: Voluntary Self-Identification For government reporting purposes, we ask candidates to respond to the below self-identification survey. Completion of the form is entirely voluntary. Whatever your decision, it will not be considered in the hiring process or thereafter. Any information that you do provide will be recorded and maintained in a confidential file. As set forth in SpaceX’s Equal Employment Opportunity policy, we do not discriminate on the basis of any protected group status under any applicable law. Gender Select... Are you Hispanic/Latino? Select... Race & Ethnicity Definitions If you believe you belong to any of the categories of protected veterans listed below, please indicate by making the appropriate selection. As a government contractor subject to the Vietnam Era Veterans Readjustment Assistance Act (VEVRAA), we request this information in order to measure the effectiveness of the outreach and positive recruitment efforts we undertake pursuant to VEVRAA. Classification of protected categories is as follows: A "disabled veteran" is one of the following: a veteran of the U.S. military, ground, naval or air service who is entitled to

compensation (or who but for the receipt of military retired pay would be entitled to

compensation) under laws administered by the Secretary of Veterans Affairs; or a person who was discharged or released from active duty because of a service-connected disability. A "recently separated veteran" means any veteran during the three-year period beginning on the date of such veteran's discharge or release from active duty in the U.S. military, ground, naval, or air service. An "active duty wartime or campaign badge veteran" means a veteran who served on active duty in the U.S. military, ground, naval or air service during a war, or in a campaign or expedition for which a campaign badge has been authorized under the laws administered by the Department of Defense. An "Armed forces service medal veteran" means a veteran who, while serving on active duty in the U.S. military, ground, naval or air service, participated in a United States military operation for which an Armed Forces service medal was awarded pursuant to Executive Order 12985. Veteran Status Select... Voluntary Self-Identification of Disability Form CC-305 Page 1 of 1 OMB Control Number 1250-0005 Expires 04/30/2026 Why are you being asked to complete this form? We are a federal contractor or subcontractor. The law requires us to provide equal employment opportunity to qualified people with disabilities. We have a goal of having at least 7% of our workers as people with disabilities. The law says we must measure our progress towards this goal. To do this, we must ask applicants and employees if they have a disability or have ever had one. People can become disabled, so we need to ask this question at least every five years. Completing this form is voluntary, and we hope that you will choose to do so. Your answer is confidential. No one who makes hiring decisions will see it. Your decision to complete the form and your answer will not harm you in any way. If you want to learn more about the law or this form, visit the U.S. Department of Labor’s Office of Federal Contract Compliance Programs (OFCCP) website at www.dol.gov/ofccp . How do you know if you have a disability? A disability is a condition that substantially limits one or more of your “major life activities.” If you have or have ever had such a condition, you are a person with a disability. Disabilities include, but are not limited to: Alcohol or other substance use disorder (not currently using drugs illegally) Autoimmune disorder, for example, lupus, fibromyalgia, rheumatoid arthritis, HIV/AIDS Blind or low vision Cancer (past or present) Cardiovascular or heart disease Celiac disease Cerebral palsy Deaf or serious difficulty hearing Diabetes Disfigurement, for example, disfigurement caused by burns, wounds, accidents, or congenital disorders Epilepsy or other seizure disorder Gastrointestinal disorders, for example, Crohn's Disease, irritable bowel syndrome Intellectual or developmental disability Mental health conditions, for example, depression, bipolar disorder, anxiety disorder, schizophrenia, PTSD Missing limbs or partially missing limbs Mobility impairment, benefiting from the use of a wheelchair, scooter, walker, leg brace(s) and/or other supports Nervous system condition, for example, migraine headaches, Parkinson’s disease, multiple sclerosis (MS) Neurodivergence, for example, attention-deficit/hyperactivity disorder (ADHD), autism spectrum disorder, dyslexia, dyspraxia, other learning disabilities Partial or complete paralysis (any cause) Pulmonary or respiratory conditions, for example, tuberculosis, asthma, emphysema Short stature (dwarfism) Traumatic brain injury Disability Status Select... PUBLIC BURDEN STATEMENT: According to the Paperwork Reduction Act of 1995 no persons are required to respond to a collection of information unless such collection displays a valid OMB control number. This survey should take about 5 minutes to complete. Submit application Powered by Greenhouse

A meeting lands on your calendar

If they’re a yes, I book the chat. You show up — that’s the whole job-hunt.